Crank Installation

Before starting this maintenance process, below tasks/process must be completed:

  • Disconnect battery / power supply

Tools required

8mm Allen Key

Steps to follow

Step 1 Installing new crank

1.1

Collect the replacement crank & align the crank hole to the BB shaft.

Make sure that the crank’s orientation is correct prior to inserting crank onto BB shaft.
1.2

Insert the crank until it is fully flushed.
1.3

Screw in the crank bolt and using an 8mm Allen Key, firmly tighten the crank bolt.

Make sure that the crank is fully secure.

End of Article

Table of Contents