LED Casing Replacement

Getting ready

It is advised to wear suitable protective personal equipment (PPE) and be in safe working environment. Before starting this maintenance process, below tasks must be completed:

  • Disconnect battery / power supply

Tools Required

Torque Driver

Parts required

You will need to prepare the listed parts for this maintenance procedure.

Replacement LED Casing

Steps to follow

Step 1 Removing old LED Casing


Using a torque driver, remove all screws that securing LED Casing on the wheel.

Total 4 units of screws must be removed from the old LED Casing.

Once all screw has been removed, carefully remove the old LED Casing. Gently peel off the LED strip from the old LED casing and set it aside.

Step 2 Installing new LED Casing


Carefully stick the LED strip to the new LED Casing prior to installing the casing.

Align the new LED Casing with all its correct screw holes on the wheel.

Using a torque driver, insert and firmly tighten screws into the LED casing.

Total 4 screws must be installed onto the LED casing. Ensure that all screw has been fully tightened.

End of Article

Table of Contents