Removing Kickstand

Before starting this maintenance process, below tasks/process must be completed:

  • Disconnect battery / power supply

Tools required

Torque Driver

Steps to follow

Step 1 Removing kickstand

1.1

Extend the kickstand to its maximum point.
1.2

Using a torque driver, loosen up 1 unit of Flat Head screw.

Remove the screw and set it aside.
1.3

Then, retract the kickstand back into its original position.
1.4

Using a torque drive, loosen up 2 units of Socket Head screws.

Remove the screws and set it aside.
1.5

Remove the old kickstand from the Stand Cam.

End of Article

Table of Contents